Rainbow over the Internet: How Internet use curtails homophobia in China

China, despite its rapid economic modernization and the lack of powerful conservative institutions, is not known for embracing diverse sexual orientation. The present study investigates whether and how Internet use, a increasingly important part of contemporary people's daily life, leads to changes in people's attitudes toward homosexuality in China, and relevant policy implications. Analyzing the Chinese General Social Survey data from 2010 to 2015, this paper develops an ordered probit model to quantify the influence of Internet use on homosexuality tolerance, adopts a substitution variable method to conduct the robustness check, and utilizes instrument variables to address the potential endogeneity in the regressions. The results show that Internet use has a significant positive impact on Chinese people's homosexuality tolerance. Further studies have found that the influence of Internet use on homosexuality tolerance is also heterogeneous to different populations. Besides, compared with traditional media, the Internet has a more significant impact on homosexuality tolerance. This paper provides some explanations for the rise in China's homosexuality tolerance from 2010 to 2015, and additional impetus for the international community to push for a liberal Internet policy in China.     

Rapid Hormetic Responses of Photosystem II Photochemistry of Clary Sage to Cadmium Exposure

Five-day exposure of clary sage (Salvia sclarea L.) to 100 μM cadmium (Cd) in hydroponics was sufficient to increase Cd concentrations significantly in roots and aboveground parts and affect negatively whole plant levels of calcium (Ca) and magnesium (Mg), since Cd competes for Ca channels, while reduced Mg concentrations are associated with increased Cd tolerance. Total zinc (Zn), copper (Cu), and iron (Fe) uptake increased but their translocation to the aboveground parts decreased. Despite the substantial levels of Cd in leaves, without any observed defects on chloroplast ultrastructure, an enhanced photosystem II (PSII) efficiency was observed, with a higher fraction of absorbed light energy to be directed to photochemistry (Φ_PSΙΙ). The concomitant increase in the photoprotective mechanism of non-photochemical quenching of photosynthesis (NPQ) resulted in an important decrease in the dissipated non-regulated energy (Φ_NO), modifying the homeostasis of reactive oxygen species (ROS), through a decreased singlet oxygen (¹O₂) formation. A basal ROS level was detected in control plant leaves for optimal growth, while a low increased level of ROS under 5 days Cd exposure seemed to be beneficial for triggering defense responses, and a high level of ROS out of the boundaries (8 days Cd exposure), was harmful to plants. Thus, when clary sage was exposed to Cd for a short period, tolerance mechanisms were triggered. However, exposure to a combination of Cd and high light or to Cd alone (8 days) resulted in an inhibition of PSII functionality, indicating Cd toxicity. Thus, the rapid activation of PSII functionality at short time exposure and the inhibition at longer duration suggests a hormetic response and describes these effects in terms of “adaptive response” and “toxicity”, respectively.     

Role of interface on irradiation damage of Cu−diamond composites using classical molecular dynamics simulations

Cu?diamond composites have been proposed as a candidate thermal management material for spacecraft electronics. Nevertheless, irradiation effects on the composites remain poorly understood at present. Here we focus on investigating the influence of Cu?diamond interfaces (CDIs) on energetic displacement cascades using atomistic simulations. Results show that a primary knock-on atom of Cu (PKA-Cu) can induce more significant damage than a PKA-C. Under almost all circumstances, the statistically averaged fraction of surviving interstitials is not only lower than that of vacancies but also no more than 1. Because of the unique nature in the mobility and interactions with CDIs, Cu interstitials exhibit the lowest concentration among all defects in most cases. The high residual rate of displaced defects in diamond makes it relatively difficult to heal. The structural damage is mainly manifested in a short-range disorder of diamond and a long-range disorder of Cu after irradiation. At elevated temperatures, the atomic displacement region may form compact chain-like defects to restrain lattice loosening. Despite the above, CDIs could act as effective sinks to facilitate the recombination and/or annihilation of irradiation-induced defects in all scenarios. This study provides an important insight into the understanding of the microscopic evolution of irradiation defects for the composites.     

Effects of developmental stage,cold acclimation and diet on the cold tolerance of three species of Cryptolestes (Coleoptera: Laemophloeidae)

Flat grain beetles (Coleoptera: Laemophloeidae) are common stored-product insect pests in Canada, infesting cereals in grain bins, equipment and end products in flour mills. We studied the cold tolerance of the three most common flat grain beetles: Cryptolestes ferrugineus, Cryptolestes turcicus and Cryptolestes pusillus, by measuring the survival at −10 °C and supercooling point (SCP) for different life stages (egg, young larva, old larva, pupa and adult) reared on flour mixed with brewer’s yeast. Probit analysis was used to estimate the lethal time for 50 and 95% mortality. This was done with non-acclimated individuals (only held at 30 °C) or cold-acclimated individuals (held at 18, 10 and 5 °C, for 1 week/temperature). In general, adults were the most cold-hardy stage for each of the species. Acclimated insects were anywhere from no increase in cold tolerance to 14-fold more cold-tolerant than the corresponding non-acclimated stage and species. Cryptolestes ferrugineus was most cold-tolerant species (58 d at −10 °C to reach 95% mortality for acclimated adult), C. turcicus was the next most cold-tolerant, (39 d) and C. pusillus was the least cold-tolerant (11 d). The cold tolerance of adults reared on three diets was measured both for acclimated and non-acclimated insects. The adults reared on grain diet (whole wheat kernels, cracked wheat kernels and wheat germ (90:5:5 mass ratio) were the most cold-tolerant, adults reared on white-wheat flour and brewer’s yeast diet (95:5 mass ratio) had the next highest cold tolerance followed by the adults reared on 100% white-wheat flour. Supercooling point (SCP) of insects ranged from −20.6 to −26.7 °C. In general, acclimated insects had slightly lower SCP than non-acclimated insects.     

Perfluorocarbons in Chemical Biology

Perfluorocarbons, saturated carbon chains in which all the hydrogen atoms are replaced with fluorine, form a separate phase from both organic and aqueous solutions. Though perfluorinated compounds are not found in living systems, they can be used to modify biomolecules to confer orthogonal behavior within natural systems, such as improved stability, engineered assembly, and cell-permeability. Perfluorinated groups also provide handles for purification, mass spectrometry, and ¹⁹F NMR studies in complex environments. Herein, we describe how the unique properties of perfluorocarbons have been employed to understand and manipulate biological systems.     

Microbial Upgrading of Acetate into Value-Added Products—Examining Microbial Diversity,Bioenergetic Constraints and Metabolic Engineering Approaches

Ecological concerns have recently led to the increasing trend to upgrade carbon contained in waste streams into valuable chemicals. One of these components is acetate. Its microbial upgrading is possible in various species, with Escherichia coli being the best-studied. Several chemicals derived from acetate have already been successfully produced in E. coli on a laboratory scale, including acetone, itaconic acid, mevalonate, and tyrosine. As acetate is a carbon source with a low energy content compared to glucose or glycerol, energy- and redox-balancing plays an important role in acetate-based growth and production. In addition to the energetic challenges, acetate has an inhibitory effect on microorganisms, reducing growth rates, and limiting product concentrations. Moreover, extensive metabolic engineering is necessary to obtain a broad range of acetate-based products. In this review, we illustrate some of the necessary energetic considerations to establish robust production processes by presenting calculations of maximum theoretical product and carbon yields. Moreover, different strategies to deal with energetic and metabolic challenges are presented. Finally, we summarize ways to alleviate acetate toxicity and give an overview of process engineering measures that enable sustainable acetate-based production of value-added chemicals.     

Influence of helium ion radiation on the nano-grained Li2TiO3 ceramic for tritium breeding

Lithium titanium oxide (Li₂TiO₃) tritium breeder ceramic plates with nano- and coarse-grain size were fabricated. The preparation methods contained CTAB-modifying precursor, combining dry-pressing with isostatically cold-pressing, and calcinating at optimized sintering temperature in turn. Then their properties were characterized after radiation by 280 keV helium (He⁺) ion. Extensive characterization analyses were performed to reveal the changes in nano-grained and coarse-grained Li₂TiO₃ after radiation. They contained glancing angle X-ray diffraction (GIXRD), atomic force microscopy (AFM), electron spin resonance (ESR), and scanning electron microscopy (SEM). The results showed as follows, GIXRD peak position of the nano-grained Li₂TiO₃ was more stable than the coarse-grained Li₂TiO₃ after radiation. Nano-grained Li₂TiO₃ was less rough and swollen than the coarse-grained one after radiation. Nano-grained Li₂TiO₃ had more excellent structural stability and less defect concentration of Eʹ-center after radiation. As a result, nano-grained Li₂TiO₃ might have much better radiation tolerance than the coarse-grained one by comparing characterization results.     

Chemoenzymatic Asymmetric Synthesis of Pyridine-Based α-Fluorinated Secondary Alcohols

Fluoro-substituted and heteroaromatic compounds are valuable intermediates for a variety of applications in pharma- and agrochemistry and synthetic chemistry. This study investigates the chemoenzymatic preparation of chiral alcohols bearing a heteroaromatic ring with an increasing degree of fluorination in α-position. Starting from readily available picoline derivatives prochiral α-halogenated acyl moieties were introduced with excellent selectivity and 64–95 % yield. The formed carbonyl group was subsequently reduced to the corresponding alcohols using the alcohol dehydrogenase from Lactobacillus kefir, yielding an enantiomeric excess of 95–>99 % and up to 98 % yield.     

Pd coated one-dimensional Ag nanostructures: Controllable architecture and their electrocatalytic performance for ethanol oxidation in alkaline media

One-dimensional (1D) metal-coated Pd structures are efficient catalysts for the ethanol electro-oxidation and promising strategy for minimizing the Pd-loading toward commercialization of direct ethanol fuel cells (DEFCs). Herein, the decorated and core-shell architectures of a novel Pd coating on Ag nanowires (PdAg-NWs) are controllable by a two-step polyol method based on the galvanic replacement reaction. The integration of uniform shell with a low Pd concentration and partial hollow structure onto 1D PdAg-NWs exhibits the highest efficiency for ethanol oxidation reaction (EOR) in alkaline solution. In comparison with Pd nanoparticles (PdNPs/C), the PdAgNWs/C performes 11 times superior EOR activity, and the onset potential shifts 80 mV negatively. The presence of Ag in PdAg-NWs enhances the absorption capacity of ethanol molecules and hydroxyl ions on the active sites, and improves the catalyst tolerance to CO-like intermediates, making them a potential anodic catalyst for DEFCs.